RealSystem Server Basicのインストール |
ダウンロードしたReal System Server BasicをLinuxにインストールしてみよう。
インストールをするためには,rootユーザーとなってダウンロードしたrs-8-01-linux-libc6.binを指定できるカレントディレクトリに移動し,次のように実行しよう。
# ./rs-8-01-linux-libc6.bin |
|
実行をするとファイルが展開され,次のようなセットアップ画面が表示される。「Enter」キーを押して次に進もう。
Welcome to the RealServer Setup for UNIX Setup will help you get RealServer running on your computer. Setup will step you through the installation process by displaying informational screens. Please follow the navigational controls below: Key Behavior === ======== N Next P Previous X Exit F Finish (Express Installation) Each input requires the execution of the key above followed by the [ENTER] key. Enter [N]ext to continue: |
ライセンスキーの存在するディレクトリ先を入力する画面が表示される。Eメールに添付されて送られてきたライセンスキーのファイル名をフルパスで入力する。
If a RealServer license key file has been sent to you, please enter its directory path below. If you have not received a RealServer license key file, then this server WILL NOT OPERATE until a license key file is placed in the server's License directory. Please obtain a free Basic RealServer license or purchase a commercial license from our website at http://www.real.com/. If you need further assistance, please visit our on-line support area at http://service.real.com/, or contact our RealServer technical support team at (206) 674-2681. License Key File: ライセンスキーのファイル名を入力 |
次のようなメッセージが表示されるので,続けて「Enter」キーを押す。
Installation and use of RealServer requires acceptance of the following terms and conditions: Press [Enter] to display the license text... |
ライセンス要項が表示される。次のように同意するかどうかが尋ねられる。ライセンス要項に同意し,Real System Server Basicをインストールするのであれば,「Enter」キーを押して進めよう。
Choose "Accept" to accept the terms of this license agreement and continue with RealServer setup. If you do not accept these terms, enter "No" and installation of RealServer will be cancelled. (Default: Accept): |
次にReal System Serverを入力するインストール先のディレクトリが尋ねられる。どこにインストールしても構わないが,本稿では「/usr/
Enter the complete path to the directory where you want RealServer 8.0 to be installed. You must specify the full pathname of the directory and have write privileges to the chosen directory [/home/osawa/rserver]: /usr/local/realserver |
次は,Real System Serverを管理するアカウントの作成だ。ここでは「realadmin」という名前を使うことにする。
Please enter a username and password that you will use to access the web-based RealSystem Administrator, the RealSystem monitors, and RealSystem live encoders: Username: realadmin |
次に,その管理用ユーザーのパスワードを設定する。
Password: 設定するパスワードを入力する |
パスワードは確認のためにもういちど問われるので,同じパスワードを再入力する。
Confirm Password: 上記のパスワードと同じものを入力する |
次に,PNAコネション「pnm://......」でアクセスされる時のポート番号を指定する。標準では「7070」となっている。これは,「pnm://.......」の標準ポート番号なので,特に変える必要が無い限り,このまま「Enter」キーを押せばよいだろう。
|
Please enter a port on which RealServer will listen for PNA connections. These connections have URLs that begin with "pnm://": (Default: 7070) |
さらにRTSTコネクション「rtsp://......」でアクセスされる時のポート番号を指定する。標準では「554」となっている。これは「rtsp://......」の標準ポート番号なので,これも変える必要が無ければこのまま「Enter」キーを押せばよい。
|
Please enter a port on which RealServer will listen for RTSP connections. These connections have URLs that begin with "rtsp://": (Default: 554) |
そして,おなじみのHTTPコネクション「http://......」でアクセスされる時のポート番号を指定する。標準では「8080」となっている。ポート8080は,通常のサイトではWebサーバのApacheなどで使うポート80番と重複することが無いため,このままで構わないだろう。「Enter」キーを押すだけでよい。
|
Please enter a port on which RealServer will listen for HTTP connections. These connections have URLs that begin with "http://": (Default: 8080) |
次に,管理用ページで使用するポート番号を設定する。詳細は後述するが,ここで指定したポート番号にWebブラウザでアクセスすると,Real System Serverの各種設定が行えるのだ。
標準の管理用ポート番号はランダムに決められる。ここでは,ポート番号が32750になっているが,読者の環境では異なるポート番号が表示されていると思われる。
このままのポート番号でよければ「Enter」キーを,そぐわない場合には意識的に設定したいポート番号を入力して「Enter」キーを押す。本稿では,以下の説明を統一するため,管理用のページで使うポート番号は10080に固定するとしよう。そこで10080と入力し,「Enter」キーを押す。
RealServer will listen for RealSystem Administrator requests on the port shown. This port has been initialized to a random value for security. Please verify now that this pre-assigned port will not interfere with ports already in use on your system; you can change it if necessary. (Default: 32750) 10080 |
最後に確認のためのメッセージが表示される。これまでの設定で問題がなければ,「F」キーを押す。
You have selected the following RealServer configuration: Admin Username: realadmin Admin Password: ******** Monitor Password: ******** Encoder Username: realadmin Encoder Password: ******** PNA Port: 7070 RTSP Port: 554 HTTP Port: 8080 Admin Port: 10080 Enter [F]inish to begin copying files, or [P]revious to go back to the previous prompts: F |
|
|
ここまでの操作で,Real System Server Basicがインストール開始される。インストールが完了すると,次のように表示されてReal System Serverが起動される。管理画面を表示するかが尋ねられる。「Enter」キーを押せば,管理画面が表示されるのだが,ここでの環境Red Hat Linuxではうまく動作しないため,「No」と入力し起動しないことにしている。もちろん後からでも設定が可能だ。
RealServer installation is complete. The RealSystem Administrator allows you to configure and maintain RealServer through an intuitive web-based interface. Please note that RealServer must be running in order to use the Administrator. Would you like to start RealServer now and launch the RealSystem Administrator? (Default: Yes) No |
4/9 |